MX 1~10k

The MX UPS is an online double conversion UPS available from 1kVA to 10kVA with an output power factor 1. It is designed to provide continuous utility power protection for critical system installation. The MX series has USB and RS-232 communication ports as standard, with a built-in intelligent slot for optional protocol converters (e.g. SNMP…). The MX Series is the best solution for different applications: data centers, servers and networking devices, control systems, video surveillance systems...

True Online Double Conversion Design
Pure Sine Wave Output
Fully Digitized Microprocessor Control
DSP Technology
Output Power Factor 1
Active Input Power Factor Correction (PFC 0.99)
50/60 Hz Frequency Converter
Wide Input Voltage Range
Built in Automatic Bypass
Generator Compatible
N+X Parallel Redundancy Configuration*
Emergency Power Off Function (EPO)

Cold Start Function (DC Power On)
Advanced Battery Management (ABM Technology)
Automatic Diagnostics & Battery Check
High Overload Capability and Enhanced Short Circuit Protection
Eco Mode For Energy Saving
Isolation Transformer*
Programmable Power Management Outlets
Multi-Function LCD Display
Software Monitoring and Control
Smart RS-232/USB Communication Port
SNMP/AS-400 Communication Slots*

*Optional Features

TECHNICAL SPECS

Specifications

Model

MX 1k

Input

Rating

Voltage

Frequency

Voltage range

Power Factor

THDi

1000VA

220V, 230V, 240V, 1Ø 2Wires

40Hz~70Hz

160-300 VAC at 100% load, 110-300 VAC at 50% load

>99%

≤3%

Ouput

Output Power with cosφ=1

Voltage (on battery)

Frequency (on battery)

Transfer Time

UPS Design Technology

Output Wave Form

Total Harmonic distortion (THD)

Crest Factor

1000W

220V, 230V, 240V, +/-1% (selectable output voltage), 1Ø 2Wires

50/60 Hz +/-0.1Hz

0 ms

Online double conversion design

Pure Sinewave

≤2% (linear load), ≤4% (non linear load)

3:1

Efficiency

AC Mode

Battery Mode

95%

93%

Protection

Overload Protection

Short Circuit Protection

110% for 10min, 130% for 1min, >130% for 3sec

UPS output cut off immediately using input fuse/circuit breaker protection

System Display

LCD indicators

UPS status, load level, battery level, input/output voltage, discharge time and fault indicators

Alarm

Battery mode

Low battery

Overload

Fault

Sounding every 4 second

Sounding every second

Sounding twice every second

Continuously sounding

Battery

Battery Type

Typical Recharge Time

Charging Current

DC Voltage

Back up time(1/2 Load)

12V 7Ah

4 hours to 90% capacity

1.5A

36 VDC

10~15 min depending on load

Communication

USB, RS-232, AS-400**

SNMP**

Compatibility

Interface with power management software

Power Management from SNMP manager and web browser

Supports Windows family, Linux, Unix and Mac

Physical

Dimension, WxDxH mm

Net Weight Kgs(lbs)

145 X 397 X 220

12.5 (27.5lbs)

Environment

Ambient operation

Audible noise

Maximum elevation at 1000m, 0 to 40°C, 20 to 95% humidity (non-condensing)

<50dBA at 1 Meter

Standards & Certifications

Performance

Safety

EMC (EMS / EMI)

Design, production, & services

Environment

Marking & Certifications

EN50091-3/IEC 62040-3

UL 1778, CE, EN 50091-1,EN 60950 (RD/), IEC 60950

IEC 61000-4-2/-3/-4/-5/-6/-8/-11, IEC 61000-3-2/-3,FCC Part 15, CISPR 22, EN 50091-2/IEC62040-2 Class A, EN 55022/B,FCC 47 part 15 - Subpart B -

ISO 9001

ISO 14001 certified company

CE, TUV/GS, UL, cUL, c-Tick

* NOTE 1: Derate to 60% of capacity in CVCF mode and to 90% when the output voltage is adjusted to 208VAC.
NOTE 2: If the UPS is installed or used in a place where the altitude is above than the rated altitude, the output power must be derated one percent per 100m.
** For optional features
***Product specifications are subject to change without further notice

UPS

Solar Power

Batteries

Inverters

Stabilizers

Switch Systems

Accessories

MX 1~10k

Specifications

related products

MXL 1~10k

MXRM 1~10k

MXLRM 1~10k

VX 1~10k

MX31 10~20k

MXRM31 10~20k

MXL31 10~20k

MXLRM31 10~20k

MX33 10~40k

MXL33 10~60k